Please note: All of our materials are products of nature and therefore colors, veining & character will vary from stone to stone.

Enlarge A Photo By Clicking Anywhere On The Image.

CAMBRIAN CREAM

2 1/4" Cambrian Cream Sills - Standard 3", 5", 7" or 10" depths, includes rock-facing. Specific lengths and finishes available at additional cost. Material is 4 1/2’.

CARMEL CREAM

PLEASE NOTE: Carmel Cream is a stone of extreme variations in color and veining. Maximum length 4', maximum height 2'.

(above) Carmel Cream Custom Hearths. Standard thickness 2 1/4", shown 4" thick.

(below, left) Carmel Cream Thermal 7” Sills with Chestnut Boulder Veneer

AQUA GRANTIQUE

Polished Surface with Bush-Hammer Edge

Polished Surface with Bush-Hammer Edge

2.25" Bush-Hammer Treads

6" Tapestry Surface & Face

Tapestry Surface & Face

Thermal Surface and Bush-Hammer Face

Polished Surface & Face, 3.5" Thick

Sawn Top, Split-Face, 3.5" Thick

Tapestry Surface & Face, 3.5" Thick

Thermal Surface & Face, 3.5" Thick

Bush-Hammer Surface & Face, 3.5" Thick

HIGHLAND BROWN

Natural Top/Bottom and Weathered/Seam-Face.
Ends Are Either Snapped If Under 4'6" or Sawn of Over 4'6"; Rock-Facing Available. *NOTE: Weathered/Seam-Face Ends Not Available

SANDY CREEK & HIGHLAND BROWN
ACCESSORY STONES

SANDY CREEK-Natural Bed (Top And Bottom), Split On All Sides.
Maximum Length On All Split Material is 4 1/2’.

HIGHLAND BROWN-Natural Bed (Top And Bottom), Weathered On One Face, The Ends And Back Are Split. Maximum Length On All Split Material is 4 1/2’.

Sandy Creek Hearth - Natural Bed (top & bottom) 3" Thick*

Sandy Creek Hearth - Natural Bed (top & bottom) 3" Thick*

*NOTE: Consecutive pieces may vary up to 1” and the surface appearance will vary from piece to piece. Uniformity between adjoining pieces (+/- 1/2”) can be obtained by ordering our sawn bottom products available in either Sandy Creek or Highland Brown. Maximum Length 4'6"

Please see our Thin Veneer Accessory Stones
for alternative accessory pieces.